- o -

• observe_at() : Debug
• observe_tx_t() : NRF24L01P::observe_tx_t
• off() : LED , OutputPin
• OffScreen() : OffScreen< width, height >
• on() : LED , OutputPin
• on_accept() : INET::Server
• on_acquire() : Resource
• on_alarm() : OWI::Driver
• on_change() : AnalogPin , Button , HCSR04 , Rotary::AcceleratedDial< T, THRESHOLD > , Rotary::Dial< T >
• on_completion() : TWI::Driver , TWI::Slave
• on_connect() : INET::Server
• on_disconnect() : INET::Server
• on_event() : AnalogPin , AnalogPins , CC3000::UnsolicitedEvent , Event::Handler , HCI::Event::Handler , Job , Menu::RotaryController , Periodic , ProtoThread , Rotary::Dial< T > , TWI::Slave
• on_expired() : Job
• on_interrupt() : Alarm::Clock , AnalogComparator , AnalogPin , AnalogPins , CC1101::IRQPin , DHT , ExternalInterrupt , HCI::IRQPin , InputCapture , Interrupt::Handler , IR::Receiver , MCP7940N::AlarmInterrupt , PinChangeInterrupt , Soft::UART::RXPinChangeInterrupt
• on_key_down() : Keypad , Menu::KeypadController , Menu::Walker
• on_key_up() : Keypad
• on_release() : Resource
• on_request() : INET::Server , TWI::Slave , VLCD::Slave
• on_run() : ProtoThread
• on_rx_interrupt() : UART
• on_sample_completed() : DHT
• on_touch() : Touch
• on_transmit_completed() : RS485
• on_tx_interrupt() : RS485 , UART
• on_udre_interrupt() : RS485 , UART
• one_wire_read_bit() : DS2482
• one_wire_read_byte() : DS2482
• one_wire_reset() : DS2482
• one_wire_triplet() : DS2482
• one_wire_write_bit() : DS2482
• one_wire_write_byte() : DS2482
• open() : CC3000::Driver , CFFS::File , FAT16::File , Socket , W5100::Driver , W5200::Driver , W5500::Driver
• operator bool() : GPIO , Pin
• operator clock_t() : time_t
• operator const char *() : IOBuffer< SIZE >
• operator StringIfHelperType() : String
• operator uint16_t() : AnalogPin , Canvas::color16_t , FAT16::date_t , FAT16::time_t
• operator uint8_t() : Adafruit_I2C_LCD_Backpack::port_t , CC1101::header_t , DFRobot_IIC_LCD_Module::port_t , DS1307::control_t , DS2482::config_t , DS2482::status_t , HD44780::SR3W::port_t , HD44780::SR3WSPI::port_t , L3G4200D::ctrl_reg1_t , L3G4200D::ctrl_reg2_t , L3G4200D::ctrl_reg3_t , L3G4200D::ctrl_reg4_t , L3G4200D::ctrl_reg5_t , L3G4200D::fifo_ctrl_reg_t , L3G4200D::fifo_src_reg_t , L3G4200D::int1_cfg_t , L3G4200D::int1_duration_t , L3G4200D::int1_src_t , L3G4200D::status_reg_t , MJKDZ_LCD_Module::port_t , MPU6050::accel_config_t , MPU6050::config_t , MPU6050::fifo_en_t , MPU6050::gyro_config_t , MPU6050::int_enable_t , MPU6050::int_pin_cfg_t , MPU6050::int_status_t , MPU6050::pwr_mgmt_1_t , MPU6050::pwr_mgmt_2_t , MPU6050::signal_path_reset_t , MPU6050::user_ctrl_t , S25FL127S::config_t , S25FL127S::status1_t , S25FL127S::status2_t , SainSmart_LCD2004::port_t , W25X40CL::status_t
• operator!=() : String
• operator+=() : BitSet< N > , String
• operator-=() : BitSet< N >
• operator<() : String
• operator<<() : IOStream , OutputPin
• operator<=() : String
• operator=() : BitSet< N > , GPIO , OutputPin , PWMPin , String
• operator==() : BitSet< N > , String
• operator>() : String
• operator>=() : String
• operator>>() : AnalogPin , Pin
• operator[]() : BitSet< N > , String
• operator~() : GPIO
• output_pin() : MCP23008 , PCF8574
• output_power_level() : CC1101 , NRF24L01P , RFM69 , Wireless::Driver
• output_rate() : HMC5883L
• OutputPin() : OutputPin , Soft::SRPO< N >::OutputPin , SRPO< N >::OutputPin
• OWI() : OWI