Here is a list of all class members with links to the classes they belong to:

- o -

• obj : Menu::action_t , Registry::action_t
• observe_at() : Debug
• OBSERVE_TX : NRF24L01P
• observe_tx_t() : NRF24L01P::observe_tx_t
• oct : IOStream
• ODD_PARITY : Serial
• ODR : MCP23008
• oemName : FAT16::fbs_t
• off() : LED , OutputPin
• OffScreen() : OffScreen< width, height >
• offset : CC3000::hci_cmnd_nvmem_read_t , CC3000::hci_data_nvmem_read_t
• offset0 : HD44780
• offset1 : HD44780
• OFS : ADXL345
• oid : SD::cid_t
• OLAT : MCP23008
• on() : LED , OutputPin
• on_accept() : INET::Server
• on_acquire() : Resource
• on_alarm() : OWI::Driver
• on_change() : AnalogPin , Button , HCSR04
• ON_CHANGE : MCP23008
• on_change() : Rotary::AcceleratedDial< T, THRESHOLD > , Rotary::Dial< T >
• ON_CHANGE_MODE : Button , ExternalInterrupt , PinChangeInterrupt
• on_completion() : TWI::Driver , TWI::Slave
• on_connect() : INET::Server
• on_disconnect() : INET::Server
• on_event() : AnalogPin , AnalogPins , CC3000::UnsolicitedEvent , Event::Handler , HCI::Event::Handler , Job , Menu::RotaryController , Periodic , ProtoThread , Rotary::Dial< T > , TWI::Slave
• on_expired() : Job
• ON_FALLING : MCP23008
• ON_FALLING_MODE : AnalogComparator , Button , ExternalInterrupt , InputCapture , PinChangeInterrupt
• on_interrupt() : Alarm::Clock , AnalogComparator , AnalogPin , AnalogPins , CC1101::IRQPin , DHT , ExternalInterrupt , HCI::IRQPin , InputCapture , Interrupt::Handler , IR::Receiver , MCP7940N::AlarmInterrupt , PinChangeInterrupt , Soft::UART::RXPinChangeInterrupt
• on_key_down() : Keypad , Menu::KeypadController , Menu::Walker
• on_key_up() : Keypad
• ON_LOW_LEVEL_MODE : ExternalInterrupt
• on_release() : Resource
• on_request() : INET::Server , TWI::Slave , VLCD::Slave
• ON_RISING : MCP23008
• ON_RISING_MODE : AnalogComparator , Button , ExternalInterrupt , InputCapture , PinChangeInterrupt
• on_run() : ProtoThread
• on_rx_interrupt() : UART
• on_sample_completed() : DHT
• ON_TOGGLE_MODE : AnalogComparator
• on_touch() : Touch
• on_transmit_completed() : RS485
• on_tx_interrupt() : RS485 , UART
• on_udre_interrupt() : RS485 , UART
• ONCE_PER_MIN : DS3231::alarm2_t
• ONCE_PER_SEC : DS3231::alarm1_t
• ONE_OF : Menu
• one_of_P : Menu
• one_wire_read_bit() : DS2482
• one_wire_read_byte() : DS2482
• ONE_WIRE_READ_BYTE : DS2482
• one_wire_reset() : DS2482
• ONE_WIRE_RESET : DS2482
• ONE_WIRE_SINGLE_BIT : DS2482
• one_wire_triplet() : DS2482
• ONE_WIRE_TRIPLET : DS2482
• one_wire_write_bit() : DS2482
• one_wire_write_byte() : DS2482
• ONE_WIRE_WRITE_BYTE : DS2482
• OP_READ : W5100 , W5200
• OP_WRITE : W5100 , W5200
• open() : CC3000::Driver , CFFS::File , FAT16::File , Socket , W5100::Driver , W5200::Driver , W5500::Driver
• OPEN_TYPE : Event
• operator bool() : GPIO , Pin
• operator clock_t() : time_t
• operator const char *() : IOBuffer< SIZE >
• operator StringIfHelperType() : String
• operator uint16_t() : AnalogPin , Canvas::color16_t , FAT16::date_t , FAT16::time_t
• operator uint8_t() : Adafruit_I2C_LCD_Backpack::port_t , CC1101::header_t , DFRobot_IIC_LCD_Module::port_t , DS1307::control_t , DS2482::config_t , DS2482::status_t , HD44780::SR3W::port_t , HD44780::SR3WSPI::port_t , L3G4200D::ctrl_reg1_t , L3G4200D::ctrl_reg2_t , L3G4200D::ctrl_reg3_t , L3G4200D::ctrl_reg4_t , L3G4200D::ctrl_reg5_t , L3G4200D::fifo_ctrl_reg_t , L3G4200D::fifo_src_reg_t , L3G4200D::int1_cfg_t , L3G4200D::int1_duration_t , L3G4200D::int1_src_t , L3G4200D::status_reg_t , MJKDZ_LCD_Module::port_t , MPU6050::accel_config_t , MPU6050::config_t , MPU6050::fifo_en_t , MPU6050::gyro_config_t , MPU6050::int_enable_t , MPU6050::int_pin_cfg_t , MPU6050::int_status_t , MPU6050::pwr_mgmt_1_t , MPU6050::pwr_mgmt_2_t , MPU6050::signal_path_reset_t , MPU6050::user_ctrl_t , S25FL127S::config_t , S25FL127S::status1_t , S25FL127S::status2_t , SainSmart_LCD2004::port_t , W25X40CL::status_t
• operator!=() : String
• operator+ : String
• operator+=() : BitSet< N > , String
• operator-=() : BitSet< N >
• operator<() : String
• operator<< : BitSet< N > , DHT , DS18B20 , FAT16 , IOStream , IR::Receiver , Menu::Walker , NRF24L01P , OutputPin , OWI::Driver
• operator<=() : String
• operator=() : BitSet< N > , GPIO , OutputPin , PWMPin , String
• operator==() : BitSet< N > , String
• operator>() : String
• operator>=() : String
• operator>>() : AnalogPin , Pin
• operator[]() : BitSet< N > , String
• operator~() : GPIO
• optlen : CC3000::hci_cmnd_setsockopt_t
• optname : CC3000::hci_cmnd_getsockopt_t , CC3000::hci_cmnd_setsockopt_t
• optval : CC3000::hci_cmnd_setsockopt_t
• OPTVAL_MAX : CC3000
• Order : Soft::SPI , SPI
• oscon : MCP7940N::config_t
• osf : DS3231::status_t
• OTPP : S25FL127S
• OTPR : S25FL127S
• out : CDCDescriptor , DS1307::control_t
• OUT : L3G4200D
• out : MCP7940N::control_t , MSCDescriptor
• out_of_range : SD::R2
• Out_Sel : L3G4200D::ctrl_reg5_t
• OUT_TEMP : L3G4200D
• OUT_X : L3G4200D
• OUT_X_H : L3G4200D
• OUT_X_L : L3G4200D
• OUT_Y : L3G4200D
• OUT_Y_H : L3G4200D
• OUT_Y_L : L3G4200D
• OUT_Z : L3G4200D
• OUT_Z_H : L3G4200D
• OUT_Z_L : L3G4200D
• OUTPUT : HMC5883L
• OUTPUT_ENABLE : PCF8591
• OUTPUT_MODE : GPIO , IOPin
• output_pin() : MCP23008 , PCF8574
• output_power_level() : CC1101 , NRF24L01P , RFM69 , Wireless::Driver
• output_rate() : HMC5883L
• OUTPUT_RATE_0_75_HZ : HMC5883L
• OUTPUT_RATE_15_HZ : HMC5883L
• OUTPUT_RATE_1_5_HZ : HMC5883L
• OUTPUT_RATE_30_HZ : HMC5883L
• OUTPUT_RATE_3_HZ : HMC5883L
• OUTPUT_RATE_75_HZ : HMC5883L
• OUTPUT_RATE_7_5_HZ : HMC5883L
• OutputPin() : OutputPin , Soft::SRPO< N >::OutputPin , SRPO< N >::OutputPin
• OVERRUN : ADXL345
• OVRN : L3G4200D::fifo_src_reg_t
• OWI : OWI::Driver , OWI